Troubleshooting

If you encounter problems with your QuadCharger device, refer to chart below for possible solutions. If problems persist, please contact Honeywell Technical Support.

ProblemIssue

 

 

The Status LED does not come on when I

Check the power connections; make sure the Power cable is

insert a battery pack.

inserted into the Power supply connector and the battery pack

 

is properly seated.

 

 

The Status LED lights red during charging.

Try to charge the battery in one of the other charging slots. If

 

the red Status LED comes on again, then the problem is

 

associated with the battery pack. If the red status stays with the

 

charging slot, the problem is associated with the charging

 

circuitry.

 

 

The Status LED flashes red without a

If a battery is in failuare mode (flashing red LED), and that

battery in the charging slot.

battery is removed from the charging slot, the slot does not

 

reset and will continue to flash red. To reset the slot and stop

 

the flashing red LED, insert a known good battery into the slot

 

or recycle the power to the QuadCharger.

 

 

17 - 5