3.Then, using the appropriate nuts and bolts, secure the DIN Rail to a stable, flat horizontal surface.

DIN Rail (7.5 X 35 mm)

Wall Mounting

The optional wall mount bracket enables secure mounting of the base on a vertical surface. The wall mount bracket can be used in conjunction with the DIN rail but does not require the DIN Rail for use.

Hardware (Provided)

•M3 x 9 mm self-tapping screws, #2 Phillips, Qty. 4

•3/8 in. x 4 in. round head toggle bolt, 2-5/8 in. usable length, Qty. 4

•3/8 in. x 2 1/2 in. length Hex Head Lag Screw, Qty. 4

Tools Required

•Drill

•7/8 in. Drill Bit (for hollow wall installations) or 1/4 in. Drill Bit (for wood stud installation)

•Phillips Screw Driver

Hollow Wall Installation

1.Drill four pilot holes in the wall using a 7/8 in. drill bit.

13.78in.

[ 35 cm ]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wall Mount Braket

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.5 in.

 

 

 

 

 

 

Wall Mount Holes

 

 

 

 

 

 

 

 

 

 

 

 

 

[16.5 cm]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16 - 8