Bottom Panel

For details on how to mount the eBase, see Mounting the HomeBase on page 12-9.

Serial Number Label

Compliance Label

Power

The base requires 12 Volts DC input for communications, battery charging, and power output to the ter- minal; the power adapter included with the base converts the voltage from the AC power source to 12 Volts DC. Use only the Honeywell 12VDC, 3A power supply provided with the base. The operating temperature range is -10° to 50°C (14° to 122°F).

Honeywell recommends that you leave the base connected to its power source at all times, so that it is always ready to use.

!We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.

Connecting Power to the HomeBase

A/C Power Cord

Power

 

Adapter

Power Cable

1.Plug the A/C power cord into the power adapter.

2.Plug the power cable into the power connector on the back of the HomeBase.

3.Plug the A/C power cord into a grounded power source. The base is now powered. The Power/Dock LED on the HomeBase illuminates solid red to indicate the HomeBase has power and no terminal is docked.

12 - 5