Bottom Panel

The power supply and RS232 connectors are located on the bottom of the unit.

Power Supply

Connector

RS232 Communications Port

Power Supply Connector

To run on vehicle power, you can use the 12 VDC cable. The appropriate cable comes with the kit you ordered. The 12 VDC cable can be used with a cigarette lighter outlet.

!Verify that the power source is always within the specified range and observe correct input voltage polarity. An improper input voltage range or reverse polarity could damage the power conversion circuitry.

RS232 Communications Port

Use a standard serial cable to connect the unit to a host device via RS232; see Serial Connector on page 14-8.

14 - 3