Honeywell EN2H-0221GE51 R0808 service manual Solid menu Solid Fuel

SDC / DHC				Operation
Para-	Designation	Setting range / Setting values	Factory	Setting
meter			setting
10	Reset heat	SET by pressing the input button	–
	balance
11	Volume flow	0 ... 30 L/min or L/pulse	0
12	Density of medium	0.8 ... 1.2 kg/L	1.05
13	Heat capacity of	2 ... 5 KJ/kgK	3.6
	medium
14	Final switch-off	OFF, 90 to 210 °C	210
	temperature
15	Test cycle of solar	1 ... 60 min	10
	charging
	switchover
16	Switchover tem-	20 ... 110 °C	75
	perature

5.4.10"Solid" menu (SOLID FUEL)

The parameters in this menu refer to special settings with regard to solids regulation.

Enabling occurs only with corresponding activation in the "Hydraulics" menu.

Para-	Designation	Setting range / Setting values		Factory	Setting
meter				setting
01	Minimum	20	... 80 °C	60
	temperature
02	Maximum	30	... 100 °C	90
	temperature
03	Switch-on	(Setting value of parameter		10
	differential	04	+ 3 K) to 20 K
04	Switch-off	2 K to (setting value of parameter		5
	differential	03	– 3 K)
05	Heat generator	OFF, 2 to 180 min		OFF
	cycle inhibitor

EN2H-0221GE51 R0808 107