Bluetooth Reader Beep and LED Indications

Bluetooth Mobile Device Beep Type

Beep Type from Bluetooth DeviceBehavior

 

 

Acknowledge label

1 beep

 

 

Label rejected

2 beeps at low frequency

 

 

Transmission error

Beep will sound high-low-high-low

 

 

Link successful

Beep will sound low-medium-high

 

 

Link unsuccessful

Beep will sound high-low-high-low

 

 

Bluetooth Mobile Device LED

 

LED on Bluetooth Device

Behavior

 

 

Yellow LED blinks at 2 Hz

Linking in progress

 

 

Off

Disconnected or unlinked

 

 

Yellow LED blinks at 50 Hz

Bluetooth transmission in progress

 

 

Yellow LED blinks at the same rate as the paging beep

Paging

(1 Hz)

 

 

 

Green LED blinks once a second

Disabled indication

 

 

Upon startup, if the Bluetooth mobile scanner sounds a long tone, this means the scanner has not passed its automatic Selftest and has entered isolation mode. If the scanner is reset, the sequence is repeated. Contact Technical Assistance (page 16-1)if you need help.

Bluetooth Printer Setup

The Bluetooth managed printer should be as close as possible, in direct line of sight, with the MX7 Tecton during the pairing pro- cess.

1.Open the Bluetooth control panel on the MX7 Tecton.

2.Tap Discover. Locate the Bluetooth printer in the Discovery panel.

3.Tap and hold the stylus (or double-tap) on the Bluetooth printer until the right-mouse-click menu appears.

4.Select Pair as Printer to pair the MX7 Tecton with the Bluetooth managed printer.

The devices are paired. The Bluetooth managed printer may respond with a series of beeps or LED flashes.

Refer to the Bluetooth managed printer manufacturer User's Guide; it may be available on the manufacturer’s web site. Contact Technical Assistance (page 16-1)for Bluetooth mobile device help.

Note: If there is no beep or no LED flash from the Bluetooth managed printer, the MX7 Tecton and the printer are currently paired.

7 - 12