Honeywell MX7 Copy, Copy, hkcr, hkcu, hklm, Delete, Delete, DelRegData, Delregdata

Commands Supported by Launch

Copy	ElseIfFile	IfFile	Mkdir
Delete	EndIf	IfTerm	Rmdir
DelRegData	EndIfFile	Launch	SetRegData
DelRegKey	EndIfTerm	LaunchCmd	SetRegKey
ElseIf	FCopy	Message	Shortcut

The commands supported by Launch are detailed below. Square brackets indicate that a parameter is optional. Characters in italics represent a variable, and not a literal.

Copy

Description	Copies a file but does not overwrite an existing file.
Syntax	Copy,source-file,destination-file
Parameters	source-file: The file to be copied, including its path.
	destination-file: The destination path and filename.
Example	copy,\Storage Card\MyData.dat,\Temp\MyData.dat
Notes	If the destination file already exists, it is not overwritten, and no error is given.
	If the source file is blank, a zero-byte file is created.

Delete

Description	Deletes the specified file.
Syntax	Delete,source-file
Parameter	source-file: The file to be deleted, including its path.
Example	delete,\Temp\MyData.dat

DelRegData

Description	Deletes a specified registry data field.
Syntax	Delregdata,key,subkey,field
Parameter	key: The abbreviated major registry key where you want to delete a field. Can be one of:
	• cr or hkcr (HKEY_CLASSES_ROOT)
	• cu or hkcu (HKEY_CURRENT_USER)
	• lm or hklm (HKEY_LOCAL_MACHINE).
	The case of key does not matter.
	subkey: The subkey that holds the field you want to delete.
	field: The field that you want to delete.
Example	delregdata,LM,Software\WidgetsPlc\OurApp,AppName
Notes	An error isn’t displayed if you specify a non-existent field, but is displayed if you specify a non-
	existent key or subkey.

9 - 6