Display
The touch screen display is an active color LCD unit capable of supporting VGA graphics modes. Display size is 240 x 320 pixels in portrait orientation. The covering is designed to resist stains. The touch screen allows signature capture and touch input. A pen stylus is included. The touch screen responds to an actuation force (touch) of 4 oz. of pressure (or greater).
The color display is optimized for indoor lighting. The display is black when the device is in Suspend Mode or when both batteries have expired and the unit is Off.
Display Backlight TimerWhen the Backlight Timer expires the display backlight is turned off. The default value for the battery power timer is 3 seconds. The default value for the external power timer is “never” and the check box is blank. The backlight timer dims the backlight on the touch screen and the keypad at the end of the specified time. When the display wakes up, the Backlight timer begins the countdown again. The keypad backlight can be synchronized with the display backlight activity.
Status LEDs
•The MX7 Tecton does not have a Bluetooth managed LED. Bluetooth activity indicators are located in the taskbar.
•System Status LED is located at the top left of the keypad, above the Scan button.
•The Scan Status LED is located below the keypad.
•The Alpha Mode LED is located below the F4 key on the
| LED | Color - Activity | Indicates ... | |
|
|
| |
System Status | Red - Blinking | Power fail. Replace the main battery with a fully charged main battery. | |
|
| Or | |
|
| Connect the MX7 Tecton to external AC power then replace the main battery with a fully | |
|
| charged main battery. | |
|
|
| |
| Red - Steady | Main Battery Low. If the main battery is not replaced with a fully charged battery before | |
|
| the main battery fails, the MX7 Tecton is turned Off. | |
|
|
| |
| Green - Blinking | Display Off. No user intervention required. | |
|
|
| |
| No Color | MX7 Tecton is either full on - with the display on (backlights may be dimmed when the | |
|
| status LED has no color) or in Suspend - with the display off. | |
|
|
| |
Scan Status | Green - Steady | Good scan. | |
|
|
| |
| Red – Steady | Scan in progress. | |
|
|
| |
| No color | Integrated Scanner / Imager ready for use. | |
|
|
| |
| Amber - Steady | Bar code decoder engine is storing changed parameters. | |
|
|
| |
Alpha Mode | Green - Steady | MX7 Tecton | |
(Alph LED) |
|
| |
No color | MX7 Tecton | ||
| |||
|
|
|
Cold Storage Configuration
•MX7 Tecton 1250mAh Cold Storage battery has a blue label.
•Snowflake decal above the MX7 Tecton keypad.
•Heating element visible on the touch screen and the scan aperture.
Cold storage battery is recharged in the MX7 Tecton Battery Charger, MX7 Tecton Desk Cradle and when in an MX7 Tecton attached to an external power source (e.g., AC adapter).
The Cold Storage version is designed to operate normally when reading bar codes and moving from, and into, cold storage warehouses, freezers and vehicles where the temperatures may vary between
There is no change in the way the Cold Storage battery is inserted into and removed from the MX7 Tecton battery well.
Battery Life – minimum 2.5 hours while the unit is roaming, powered on with ambient temperature
3 - 6