Honeywell MX7 Press these Keys in this Order, The following are ANSI keymaps, To get this 5250 Key / Function, Start > Settings > Personal > Buttons

55 Key 5250 Alphanumeric KeyMap - Primary Delete

• The following keymap is used on an MX7 Tecton that is running a 5250 Terminal Emulator.

• When using a sequence of keys that includes a sticky key, press the sticky key first, release it, then press the rest of the key sequence.

• When using a sequence of keys that includes the Orange or Blue keys, press the color key first then the rest of the key sequence.

• Tapping the Power key when in any sticky mode (Blue, Orange, Shift, etc.) either turns the device On (when Off) or places it in Suspend (when On).

• Alphabetic keys default to lower case letters. Press the Shft key, then the alphabetic key for an uppercase letter.

• The diamond 1, F1, F2, F3, F4 and F5 keys can be remapped using the Button panel (Start > Settings > Personal > Buttons).

• When the computer boots, the default condition of Caps (or CapsLock) is Off. The Caps (or CapsLock) condition can be toggled with Blue plus Tab key sequence

.

To get this 5250 Key / Function		Press these Keys in this Order
Attn (Attention)	Ctl	A
Clr (Clear)	Ctl	C
Del (Delete)	Ctl	D
Dup (Duplicate)	Ctl	U
E-Inp (Erase Input)	Ctl	Q
Field Exit (Enter)	Diamond 1
Fld - (Field Minus)	Ctl	M
Fld + (Field Plus)	Ctl	L
Ins (Insert)	Ctl	I
NL (New Line)	Ctl	N
SysReq (System)	Ctl	S
The following are ANSI keymaps
Power / Suspend	Power
Field Exit (default VK_PAUSE)	Blue (MAP)	Orange (MAP)	Shift (MAP)	Diamond #1
MAP = Mappable
Volume Adjust Mode	Orange	Scan	Up Arrow / Down Arrow
Volume Adjust Mode	Blue	V	Up Arrow / Down Arrow
Display Backlight Brightness Adjust Mode	Blue	Scan
Toggle Blue Mode	Blue
Toggle Orange Mode	Orange
Toggle Shift Mode	Shft
Alt	Alt
Control	Ctl
Esc	Blue	Alt

12 - 6