COM1 does not support 5V switchable power on Pin 9 for tethered scanners.

Notification

Use this panel to toggle internal scanner sounds on and off. Internal scanner sound, by default, is enabled.

Setting

Default

 

 

Enable Internal Scanner Sound

Enabled

 

 

Good Scan Vibration

Off

 

 

Bad Scan Vibration

Off

 

 

Vibration

Enable Good scan vibration or Bad scan vibration when a tactile response on a good scan or bad scan is desired. Scan sounds are accompanied by a tactile response when the internal scanner Sound parameter is enabled.

Enable short, medium or long duration for each selection (good scan and bad scan).

Adjust the settings and tap ok to save the changes. The changes take effect immediately.

8 - 5