Assembling the AC/DC Power Supply

1. Connects to multi-purpose cables connected to the I/O port on the MX7 Tecton

2. AC receptacle

3. Wall plug

4. AC connection from wall to adapter

To apply external power to the MX7 Tecton follow the steps below in sequence.

1.Plug the 3 prong AC adapter cable end into an indoor AC power source (e.g., wall outlet).

2.Firmly press the female end of the power cable into the male connector on the power adapter. When AC power is being supplied to the power adapter, the LED on the power adapter illuminates green. The AC adapter is ready for use.

3.Squeeze the catches of the (USB/Power or Serial/Power) I/O connector and push the cable connector into the MX7 Tecton I/O port until it clicks. The click means the connector is seated firmly.

4.Press the power cable connector pin from the AC adapter into the connector on the (USB/Power or Serial/Power) cable attached to the base of the MX7 Tecton. External power is now being supplied to the MX7 Tecton.

Whenever possible, use the AC power adapter with the MX7 Tecton to conserve the main battery power and maintain a charge in the internal battery.

2 - 22