Option | Function |
|
|
| This option is Enabled by default. |
| A dialog box appears on the MX7 screen notifying the user a Bluetooth device requests to pair |
| with the MX7. |
Prompt if devices request to | The requesting Bluetooth device does not need to have been Discovered by the MX7 before the |
pairing request is received. | |
pair | Tap the Accept button or the Decline button to remove the dialog box from the screen. |
| |
| Note: In some cases, if a Bluetooth device is already paired this setting cannot be changed. |
| If this is the case, an error message is displayed and the option is not changed. The |
| Bluetooth device must be disconnected before changing this setting. |
|
|
| This option is Disabled by default. |
Continuous Search | When enabled, the Bluetooth connection never stops searching for a device it has paired with |
when the connection is broken (such as the paired device entering Suspend mode, going out of | |
| range or being turned off). When disabled, after being enabled, the MX7 stops searching after |
| 30 minutes. This option draws power from the Main Battery. |
|
|
| This option is Enabled by default. |
| Determines whether the Bluetooth client discovers and displays all serial Bluetooth devices in |
| the vicinity (Filtered Mode is disabled/unchecked) or the discovery result displays Bluetooth |
| scanners and printers only (Filtered Mode is enabled/checked). |
Filtered Mode | When Filtered Mode is disabled, the MX7 can pair with up to four Bluetooth devices, with a limit |
| of one Bluetooth scanner, one Bluetooth printer, one PAN, and one DUN connected at the |
| same time. More than one HID device can be connected but only one Bluetooth mouse and one |
| Bluetooth keyboard. |
| A Warmboot is required every time Filtered Mode is toggled on and off. |
|
|
| This option is Disabled by default. |
Printer Port - COM9 | This option assigns Bluetooth printer connection to COM9 instead of COM19. To enable this |
| option, Filtered Mode must be enabled. |
|
|
| This option is Disabled by default. |
| When logging is enabled, the MX7 creates bt_log.txt and stores it in the /System folder. |
| Bluetooth activity logging is added to the text file as activity progresses. A bt_log_bak.txt file |
Logging | contains the data stored by bt_log.txt prior to reboot. |
| During a reboot process, the MX7 renames bt_log.txt to bt_log_bak.txt. If a file already exists |
| with that name, the existing file is deleted, the new bt_log_bak.txt file is added and a new bt_ |
| log.txt is created. |
|
|
| Default: Computer System Name (System Panel > Device Name tab). |
Computer Friendly Name | The name, or identifier, entered in this space by the System Administrator is used exclusively |
| by Bluetooth devices and during Bluetooth communication. |
|
|