Summit Tray Icon

The Summit tray icon provides access to the SCU and is a visual indicator of radio status.

The Summit tray icon is displayed when:

•The Summit radio is installed and active

•The Windows Zero Config utility is not active

•The Tray Icon setting is On

Click the icon to launch the SCU.

Use the tray icon to view the radio status:

The radio is not currently associated or authenticated to an Access Point

The signal strength for the currently associated/authenticated Access Point is less than -90 dBm

The signal strength for the currently associated/authenticated Access Point is -71 dBm to -90 dBm

The signal strength for the currently associated/authenticated Access Point is -51 dBm to -70 dBm

The signal strength for the currently associated/authenticated Access Point is greater than -50 dBm

Wireless Zero Config Utility and the Summit Radio

•The WZC utility has an icon in the toolbar that looks like networked computers with a red X through them, indicating that Wireless Zero Config application is enabled but the connection is inactive at this time (the device is not connected to a network). The WZC icon may not be visible until control is passed to the WZC utility as described below.

•You can use either the Wireless Zero Configuration Utility or the Summit Client Utility to connect to your network. For best results use the Summit Client Utility to connect to your network. The Wireless Zero Configuration Utility cannot control the complete set of security features of the radio.

How To: Use the Wireless Zero Config Utility

1.Select ThirdPartyConfig in the Active Profile drop down list as the active profile (see Main Tab).

2.Warmboot the device.

The Summit Client Utility passes control to Wireless Zero Config and the WZC Wireless Information control panel. Using the options in the Wireless Zero Config panels, setup radio and security settings. There may be a slight delay before the Wireless Zero Config icon indicates the status of the connection.

How to: Switch Control to SCU

1.To switch back to SCU control, select any other profile in the SCU Active Profile drop down list, except ThirdPartyConfig.

2.Warmboot the device.

Radio control is passed to the SCU.

7-3