Misc

Options on this tab configure device specific options. Note that options not available on the MX7 are dimmed or grayed out.

CapsLock

By default, CapsLock is disabled after a warmboot. To enable CapsLock after a warmboot, click this checkbox.

Touch Screen Disable

By default, the MX7 touch screen is enabled. To disable the touch screen after a warmboot, click this checkbox.

Touch Screen Heater Disable

The touch screen heater is present on the Cold Storage MX7.

The touch screen heater disable option is only available on earlier MX7 models. This information is placed here for backward compatibility.

MX7 heating elements activate when ambient temperature drops below 0°C (32°F). When performing screen touch functions at these temperatures, it is recommended to use the stylus.. There may be some condensation as the MX7 moves in and out of cold storage areas. The condensation on the touch screen and the scan aperture quickly dissipates.

The touch screen heating elements and scanner aperture heating elements may be visible when the MX7 is tilted slightly. No user interaction is required to turn the heating elements on/off. Stylus taps on the touch screen function normally.

By default, the touch screen heater is enabled. To disable the touch screen heater, click this checkbox. If the MX7 does not have a touch screen heater, this checkbox is dimmed.

Backup Battery Low Warn Dialog Enable

Enable or disable the backup battery low warning message. The default is checked (enabled).

When the message is displayed, it must be manually dismissed by the user.

4-105