Parameter | Default |
| Explanation |
|
|
| |
|
| Specify 802.11a, 802.11b and/or 802.11g rates when communicating with the AP. The options | |
|
| displayed for this parameter depend on the type of radio (802.11b/g or 802.11a/b/g) installed in the | |
|
| mobile device. | |
|
| Options: | |
| BG |
| B rates only (1, 2, 5.5 and 11 Mbps) |
| radio: |
| BG Rates Full (All B and G rates) |
| BG |
| G rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps) |
| Rates |
| BG optimized or BG subset (1, 2, 5.5, 6, 11, 24, 36 and 54 Mbps) |
Radio | Full |
| A rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps) |
Mode | Or |
| ABG Rates Full (All A rates and all B and G rates with A rates preferred) |
| A radio: |
| BGA Rates Full (All B and G rates and all A rates with B and G rates preferred) |
| BGA |
| Ad Hoc (when connecting to another client device instead of an AP) |
| Rates | Default: | |
| Full | ||
|
|
| |
|
|
| BG Rates Full (for 802.11b/g radios) |
|
|
| BGA Rates Full (for 802.11a/b/g radio) |
|
| Note: | BG radio only – Previous SCU versions may have the default set as BG Rates Full. |
|
|
| Depending on the SCU version, either BG Optimized or BG subset is the default. |
|
|
|
|
It is important the Radio Mode parameter correspond to the AP to which the device is to connect. For example, if this parameter is set to G rates only, the MX7 may only connect to APs set for G rates and not those set for B and G rates.
The options for the Radio Mode parameter should be set, based on the antenna configuration, as follows:
Antenna Configuration Radio ModeA Main and BG Main
ABG Rates Full BGA Rates Full
A Main and A Aux | A Rates Only |
BG Main and BG Aux
B Rates Only
G Rates Only
BG Rates Full
BG Subset
Contact Technical Assistance if you have questions about the antenna(s) installed on your MX7.