Using eXpress Scan

eXpress Scan Desktop Icon

If the MX7 has an eXpress Scan icon on the desktop, eXpress Scan may be used for the initial configuration of the device.

If the eXpress Scan icon is not present on the desktop, install the Enabler. If the icon is still not present, the Enabler must be updated.

If the eXpress Scan icon is present, follow these steps to configure the MX7 to connect with the wireless network and the Mobile Device Server.

Step 1: Create Bar Codes

Bar codes are created with the eXpress Config utility on the desktop/laptop computer, not the mobile device. Depending on the bar code length and the number of parameters selected, eXpress Config generates one or more bar codes for device configuration. The bar codes contain configuration parameters for the wireless client in the device and may also specify the address of the Mobile Device Server.

Bar codes should be printed at a minimum of 600 dpi.

Step 2: Scan Bar Codes

For each device to be configured, please follow these instructions.

Start eXpress Scan on the MX7 by double clicking the eXpress Scan icon.

Enter the bar code password, if any.

Click Start.

Bar code 1 must be scanned first. The scanned data is displayed in the “Data” text box. The password, if any, entered above is compared to the password entered when the bar codes were created.

6-29