Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth devices are discovered, paired, connected and disconnected. There may be audible or visual signals as paired devices re-connect with the MX7.

•The default Bluetooth setting is On.

•The MX7 cannot be discovered by other Bluetooth devices when the Computer is discoverable option is disabled (unchecked) on the Settings panel.

•Other Bluetooth devices cannot be discovered if they have been set up to be Non-Discoverable or Invisible.

•When Filtered Mode is enabled, the MX7 can pair with one Bluetooth scanner and one Bluetooth printer.

•When Filtered Mode is disabled, the MX7 can pair with up to four Bluetooth devices, with a limit of one scanner, one printer, two HID1 devices (one Mouse, one Keyboard), one PAN2 device, and one DUN3 device connected at the same

time.

•It is not necessary to disconnect a paired scanner and printer before a different scanner or printer is paired with the MX7.

•The target Bluetooth device should be as close as possible (up to 32.8 ft (10 meters) Line of Sight) to the MX7 during the pairing process.

Assumption: The System Administrator has Discovered and Paired targeted Bluetooth devices for the MX7. The MX7 operating system has been upgraded to the revision level required for Bluetooth client operation. An application (or API) is available that will accept data from serial Bluetooth devices.

Bluetooth Devices

The Bluetooth Devices tab displays any device previously discovered and paired with the MX7.

1Human Interface Device profiles used by Bluetooth keyboards, mice, pointing devices and remote monitoring devices.

2Personal Area Networking profile. Un-modified Ethernet payloads (using BNEP) can exchange packets between Bluetooth devices. PANU is a PAN User service that uses either the NAP or the GN service.

3Dial-Up Networking provides access to the Internet and other dial-up services using Bluetooth technology.

4-59