Honeywell MX7 manual 302

32 key Numeric-Alpha Key Map

•The following keypad key map is used on an MX7 that is NOT running a Honeywell Terminal Emulator. Terminal emulators use a separate key map.

•When using a sequence of keys that require an alpha key, first press the Alph key. Use the Shft sticky key or the Caps key sequence (Blue+Tab) for upper case alphabetic characters.

•Pressing the Alph key forces “Alpha” mode for the 2,3,4,5,6,7,8, and 9 keys. The 1 and 0 keys continue to place a 1 and 0 into the text field.

•To create a combination of numbers and letters before pressing Enter, remember to tap the Alph key to toggle between Alpha and Numeric mode.

•When using a sequence of keys that do not include the Alph key but does include a sticky key, press the sticky key first then the rest of the key sequence.

•Pressing the Power key when in any sticky mode (Blue, Orange, Shift, etc) either turns the device On (when Off) or places it in Suspend (when On).

•For those key maps that require remapping (MAP), keys can be remapped using the Keypad Control Panel (Start > Settings > Control Panel > Keypad).

To get this Key / Function		Press these Keys in this Order
Power / Suspend	Power
Field Exit (default is VK_PAUSE)	Blue (MAP)		Shft (MAP)	Diamond #1
MAP = Mappable
=	Orange		Shft (MAP)	Diamond#2
				Default is Mappable
(	Blue		Shft (MAP)	Diamond#2
				Default is Mappable
!	Orange		Shft (MAP)	Diamond#3
				Default is Mappable
)	Blue		Shft (MAP)	Diamond#3
				Default is Mappable
Volume Adjust Mode	Orange		Scan	Up Arrow
				Down Arrow
Display Backlight Brightness	Blue		Scan	Up Arrow
Adjust Mode				Down Arrow
Toggle Alpha Mode	Alph
Toggle Blue Mode	Blue
Toggle Orange Mode	Orange
Toggle Shift Mode	Shft
Alt Mode	Alt
Control Mode	Ctrl
Esc	Blue		Alt
Space	Spc

8-12