Bluetooth Beep and LED Indications
Beep Type from Bluetooth DeviceBehavior

 

 

Acknowledge label

1 beep

 

 

Label rejected

2 beeps at low frequency

 

 

Transmission error

Beep will sound high-low-high-low

 

 

Link successful

Beep will sound low-medium-high

 

 

Link unsuccessful

Beep will sound high-low-high-low

 

 

LED on Bluetooth Device

Behavior

 

 

Yellow LED blinks at 2 Hz

Linking in progress

 

 

Off

Disconnected or unlinked

 

 

Yellow LED blinks at 50 Hz

Bluetooth transmission in progress

 

 

Yellow LED blinks at the same rate as the paging beep (1 Hz)

Paging

 

 

Green LED blinks once a second

Disabled indication

 

 

Upon startup, if the scanner sounds a long tone, this means the scanner has not passed its automatic Selftest and has entered isolation mode. If the scanner is reset, the sequence is repeated. Contact Technical Assistance for assistance.

Bluetooth Printer Setup

The Bluetooth managed device should be as close as possible, in direct line of sight, with the MX7 during the pairing process.

1.Open the LXEZ Pairing Panel.

2.Tap Discover. Locate the Bluetooth printer in the Discovery panel.

3.Tap and hold the stylus (or doubletap) on the Bluetooth printer ID until the right-mouse-click menu appears.

4.Select Pair as Printer to pair the MX7 with the Bluetooth managed printer.

The devices are paired. The Bluetooth managed printer may respond with a series of beeps or LED flashes.

Please refer to the Bluetooth managed printer manufacturer’s User Guide; it may be available on the manufacturer’s web site. Contact Technical Assistance for Bluetooth product assistance.

Note: If there is no beep or no LED flash from the Bluetooth managed printer, the MX7 and the printer are currently paired.

Easy Pairing and Auto-Reconnect

The Bluetooth module can establish relationships with new devices after the user taps the Discover button. It can auto- reconnect to devices previously known but which have gone out of range and then returned within range. See Also: "Reconnect"

Note: Configuration elements are persistent and stored in the registry.

Setup the Bluetooth module to establish how the user is notified by easy pairing and auto-reconnect events.

AppLock, if installed, does not stop the end-user from using the Bluetooth application, nor does it stop other Bluetooth-enabled devices from pairing with the MX7 while AppLock is in control.

4-77