Honeywell MX7 Default, Default, Function, Function, Parameter, RX Diversity, Antenna Configuration

Parameter	Default	Function
	BG: On-Start	How to handle antenna diversity when receiving packets from the Access Point.
RX		Options are: Main Only (use the main antenna only), Aux Only (use the auxiliary antenna
	on Main
Diversity		only), On-start on Main (on startup, use the main antenna), or On-start on Aux (on startup, use
	A: Main Only
		the auxiliary antenna).

The options for the RX Diversity parameter should be set, based on the antenna configuration, as follows:

Antenna Configuration	RX Diversity
A Main and BG Main	Main Only
A Main and A Aux	On-start on Main
BG Main and BG Aux	On-start on Main

Contact Technical Assistance if you have questions about the antenna(s) installed on your MX7.

Parameter	Default	Function
		If the packet size (in bytes) exceeds the specified number of bytes set in the fragment threshold, the
Frag	2346	packet is fragmented (sent as several pieces instead of as one block). Use a low setting in areas
Thresh		where communication is poor or where there is a great deal of wireless interference.
		Options are: Any number between 256 bytes and 2346 bytes.
		If the packet size exceeds the specified number of bytes set in the Request to Send (RTS) threshold,
RTS	2347	an RTS is sent before sending the packet. A low RTS threshold setting can be useful in areas where
Thresh		many client devices are associating with the Access Point.
		Options are: Any number between 0 and 2347.
		The LED on the wireless card is not visible to the user when the wireless card is installed in a sealed
LED	Off	mobile device.
		Options are: On, Off.
Tray Icon	On	Determines if the Summit icon is displayed in the System tray.
		Options are: On, Off
Hide		When On, the Summit Config Utility masks passwords (characters on the screen are displayed as an
	On	*) as they are typed and when they are viewed. When Off, password characters are not masked.
Password
		Options are: On, Off.
	SUMMIT	A string of up to 64 alphanumeric characters that must be entered when the Admin Login button is
Admin		tapped. If Hide Password is On, the password is masked when typed in the Admin Password Entry
Password	(or	dialog box. The password is case sensitive. This value is masked when the Admin is logged out.
	Blank)	Options are: none.
		Specifies the number of seconds the Summit software waits for an EAP authentication request to
		succeed or fail.
Auth	8	If the authentication credentials are stored in the active profile and the authentication times out, the
		association fails. No error message or prompting for corrected credentials is displayed.
Timeout	seconds
		If the authentication credentials are not stored in the active profile and the authentication times out,
		the user is again prompted to enter the credentials.
		Options are: An integer from 3 to 60.

7-17