Parameter | Default |
| Explanation | |
|
|
| ||
Edit Profile | Default | A string of 1 to 32 alphanumeric characters, establishes the name of the Profile. | ||
Options are Default or ThirdPartyConfig. | ||||
|
| |||
|
|
| ||
SSID | Blank | A string of up to 32 alphanumeric characters. Establishes the Service Set Identifier (SSID) of the | ||
WLAN to which the client connects. | ||||
|
| |||
|
|
| ||
Client |
| A string of up to 16 characters. The client name is assigned to the network card and the device using | ||
Blank | the network card. The client name may be passed to networking wireless devices, e.g., Access | |||
Name | ||||
| Points. |
| ||
|
|
| ||
|
|
| ||
Power |
| Power save mode is On. | ||
Fast | Options are: Constantly Awake Mode (CAM) power save off, Maximum (power saving mode) and | |||
Save | ||||
| Fast (power saving mode). When using power management, use FAST for best throughput results. | |||
|
| |||
|
|
| ||
Tx Power | Maximum | Maximum setting regulates Tx power to the Max power setting for the current regulatory domain. | ||
Options are: Maximum, 50mW, 30mW, 20mW, 10mW, 5mW, or 1mW. | ||||
|
| |||
|
|
| ||
|
| Setting the rate to Auto will allow the Access Point to automatically negotiate the bit rate with the | ||
Bit Rate | Auto | client device. | ||
|
| Options are: Auto, 1 Mbit, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 or 54 Mbit. | ||
|
|
| ||
Auth Type | Open | 802.11 authentication type used when associating with the Access Point. | ||
Options are: Open, LEAP, or Shared key. | ||||
|
| |||
|
|
| ||
|
| Extensible Authentication Protocol (EAP) type used for 802.1x authentication to the Access Point. | ||
|
| Options are: None, LEAP, | ||
EAP Type | None | |||
|
| Note: | EAP Type chosen determines whether the Credentials button is active and also determines | |
|
|
| the available entries in the Credentials | |
|
|
| ||
|
| Type of encryption to be used to protect transmitted data. Available options may vary by SCU | ||
|
| version. |
| |
|
| Options are: None, WEP (or Manual WEP), WEP EAP (or Auto WEP), WPA PSK, WPA TKIP, | ||
Encryption | None | WPA CCKM, WPA2 PSK, WPA2 AES, or WPA2 CCKM. | ||
|
| CKIP is not supported in the MX7. | ||
|
| Note: | The Encryption type chosen determines if the WEP Keys / PSK Keys button is active and | |
|
|
| also determines the available entries in the WEP or PSK | |
|
|
|
| |