Honeywell 2-Partitioned Security System manual VISTA-40 Programming Form

VISTA-40 Programming Form

Some fields are programmed for each partition (shown as shaded fields). If you are programming a multiple-partition system, see the Partition-Specific Fields section for programming these fields. Standard default (*97) values are shown in brackets.

*00	INSTALLER CODE
	Enter 4 digits, 0-9 [4140]
*02		*05 RESPONSE TYPES FOR ZONES
		Skip these fields. Use #93 Menu Mode, Zone
		Programming to program the response types.
*09	ENTRY DELAY #1		[02]
	00, 02-15 times 15 seconds
	Maximum "03" for UL.
*10	EXIT DELAY #1		[03]
	00, 03-15 times 15 seconds
	Maximum "04" for UL installations.
*11	ENTRY DELAY #2		[06]
	00, 02-15 times 15 seconds (must be longer than Entry Delay
	#1). Maximum "03" for UL installations.
*12	EXIT DELAY #2		[08]
	00, 03-15 times 15 seconds (must be longer than Exit Delay
	#1). Maximum "04" for UL installations.
*13	ALARM SOUNDER DURATION		[04]
	01-15 times 2 minutes. Must be minimum 16 minutes for UL
	installations.
*14	ZONE 9 RESPONSE TIME		[0]

*25	BURG.TRIGGER FOR RESPONSE TYPE 8		[1]
	1=enable; 0=disable
*26	INTELLIGENT TEST REPORTING		[0]
	1=yes (no report sent if any other report was recently sent);
	0=no (send report at programmed interval, field *27)
	Must be 0 for UL installations.
*27	TEST REPORT INTERVAL	[024]
	Enter interval in hours, 001-199; 000=no report;
	Max. 024 for UL installations.
*28	POWER UP IN PREVIOUS STATE		[1]
	1=yes; 0=no; "1" for UL installations.
*29	QUICK ARM		[1]
	1=yes; 0=no
*30	TOUCHTONE OR ROTARY DIAL		[0]
	1=TouchTone; 0=rotary
*31	PABX ACCESS CODE
	00-09; B-F (11-15)
*32	PRIM. SUBS. ACCT #

Enter 00-09; B-F (11-15) [15 15 15 15]

*33 PRIMARY PHONE NUMBER

Enter 1 for fast response time 10ms Enter 0 for normal response time 350ms. Must be 0 for UL installations.

*15	KEYSWITCH ASSIGNMENT	[0]
	Enter partition in which keyswitch used,
	1-2; 0=disable
*16	CONFIRMATION OF ARMING DING	[0]
	1=enable; 0=disable.
	Must be "1" for UL Installations.
*17	AC LOSS KEYPAD SOUNDING	[0]
	1=yes; 0=no
*19	RANDOMIZE AC LOSS REPORT	[0]

1=10-40 min; 0=normal report (about 2 min. after AC loss).

Enter 0-9 for each digit. Enter #11 for *, #12 for #, #13 for 2 second pause

*34 SECONDARY PHONE NUMBER

Enter 0-9 for each digit. Enter #11 for *, #12 for #, #13 for 2 second pause

*35 DOWNLOAD PHONE NO.

*20 VIP MODULE PHONE CODE
Enter 01 - 09 for the first digit; enter	[00],	[11]
11 for “*” or 12 for “#” for the second digit.
Must be set to "0" for UL installations.

*21	PREVENT FIRE TIMEOUT		[0]
	1=No timeout; 0=Timeout.
*22	KEYPAD PANIC ENABLES	[001]
	1=enable; 0=disable	995	996 999
*23	MULTIPLE ALARMS		[1]
	1=yes; 0=no
*24	IGNORE EXPANSION ZONE TAMPER		[0]

1=Ignore; 0=Enable tamper for RF and RPMs.

Must be "0" for UL installations if using these devices.

Enter 0-9 for each digit. Enter #11 for *, #12 for #, #13 for 2 second pause

*36 DOWNLOAD ID NO.

Enter 00-09; A-F (10-15) [15 15 15 15 15 15 15 15]

*37 DOWNLOAD COMMAND ENABLES

0

Dlr ShtdwnSys ShtdwnNot UsedRmt BypRmt DisarmRmt ArmUpld PgmDwnld Pgm

See field 1*53 for Callback disable option; [1=enable]; 0=disable. For UL installations, all entries must be "0."

*38 PREVENT ZONE XX BYPASS [00]

01-64; 00 if all zones can be bypassed

– 5 –