Honeywell VISTA-40, 2-Partitioned Security System manual

*39	ENABLE OPEN/CLOSE REPORT FOR		[0]
	INSTALLER CODE 1=enable; 0=disable
*40	OPEN/CLOSE REPORT FOR KEYSWITCH		[0]
	1=enable; 0=disable
*41	NORMALLY CLOSED or EOLR (Zones 2-8)		[0]
	1=N.C.loops; 0=EOLR supervision.
	Must be "0" for UL installations.
*42	DIAL TONE PAUSE		[0]
	0=5 seconds; 1=11 seconds; 2=30 seconds.
	Must be "0" UL Installations.
*43	DIAL TONE DETECTION		[1]
	1=wait for true dial tone; 0=pause, then dial
*44	RING DETECTION COUNT	[00]
	01-14; 15=answering machine; 00=no detection.
	Must be "00" for UL Burglary.
*45	PRIMARY FORMAT		[1]
	0=Low Speed; 1=Contact ID; 2=ADEMCO High Speed;
	3= ADEMCO Express
*46	LOW SPEED FORMAT (Primary)		[0]
	0= ADEMCO Low Speed; 1=Sescoa/Radionics
*47	SECONDARY FORMAT		[1]
	0=Low Speed; 1=Contact ID; 2= ADEMCO High Speed;
	3= ADEMCO Express
*48	LOW SPEED FORMAT (Sec.)		[0]
	0= ADEMCO Low Speed; 1=Sescoa/Radionics
*49	CHECKSUM VERIFICATION	[0] [0]
	1=yes; 0=no	Prim		Sec
*50	SESCOA/RADIONICS SELECT		[0]
	1=Sescoa; 0=Radionics
*51	DUAL REPORTING		[0]

1=yes; 0=no If used with Spilt Reporting "1" option (1*34), alarms and alarm restores go to both primary & secondary numbers, while all other reports go to secondary only. If used with Split Reporting "2" option, alarms and alarm restores go to both, open/close and test messages go to secondary only, while all other reports go to primary.

*52 STANDARD/EXPANDED REPORT FOR PRIMARY

[0 0 0 0 0 0]

Alarm Rstr Byp Trbl O/C LoBat

0=standard; 1=expanded;

Note: Expanded overrides 4+2 format.

*53 STANDARD/EXPANDED REPORT FOR SECONDARY

[0 0 0 0 0 0]

Alarm Rstr Byp Trbl O/C LoBat

0=standard; 1=expanded;

Note: Expanded overrides 4+2 format.

*54 *57 ALARM REPORT CODES & ID DIGITS FOR ZONES 01-16.

Skip these fields. Use #93 Menu Mode, Zone

Programming to program the report codes.

*58 SUPERVISORY AND RESTORE CODES FOR ZONES 01-16.Enter 00-09; B-F (11-15). Default = [00 00 00 00 00]

Alarm Rst Trbl Trbl Rst Byp Byp Rst

*59 *62 ALARM REPORT CODES & ID DIGITS FOR ZONES 17-32.

Skip these fields. Use #93 Menu Mode, Zone

Programming to program the report codes.

*63 SUPERVISORY AND RESTORE CODES FOR ZONES 17-32.Enter 00-09; B-F (11-15). Default = [00 00 00 00 00]

Alarm Rst Trbl Trbl Rst Byp Byp Rst

*64 *67 ALARM REPORT CODES & ID DIGITS FOR ZONES 33-48.

Skip these fields. Use #93 Menu Mode, Zone

Programming to program the report codes.

*68 SUPERVISORY AND RESTORE CODES FOR ZONES 33-48.Enter 00-09; B-F (11-15). Default = [00 00 00 00 00]

Alarm Rst Trbl Trbl Rst Byp Byp Rst

*69 *72 ALARM REPORT CODES & ID DIGITS FOR ZONES 49-64.

Skip these fields. Use #93 Menu Mode, Zone

Programming to program the report codes.

*73 SUPERVISORY AND RESTORE CODES FOR ZONES 49-64.Enter 00-09; B-F (11-15). Default = [00 00 00 00 00]

Alarm Rst Trbl Trbl Rst Byp Byp Rst

*74 *77 ALARM REPORT CODES & ID DIGITS FOR ZONES 87-99.

Skip these fields. Use #93 Menu Mode, Zone

Programming to program the report codes.

*78 SUPERVISORY AND RESTORE CODES FOR ZONES 87-99.Enter 00-09; B-F (11-15). Default = [00 00 00 00 00]

			Alarm Rst		Trbl		Trbl Rst		Byp	Byp Rst
ZONE TYPE RESTORE ENABLES
*79 FOR ZONE TYPES 1-8
1	2	3	4	5	6	7	8
1=enable; [0=disable]
*80 FOR TYPES 9, 10
								9		10
1=enable; [0=disable]

– 6 –