Programming With #93 Menu Mode
NOTE: The following field should be preset before beginning: 2*00 Number of Partitions. In addition, receivers should be programmed via Device programming.
After programming all system related programming fields in the usual way, press #93 while still in programming mode to display the first choice of the menu driven programming functions. Press 0 (NO) or 1 (YES) in response to the displayed menu selection. Pressing 0 will display the next choice in sequence.
UL | For UL installations, verify that the audio alarm verification feature is disabled. |
|
#93 MENU MODE KEY COMMANDS
The following is a list of commands used while in the menu mode.
#93 | Enters Menu mode |
[4] | Serves as ENTER key. Press to have keypad accept entry. |
[#]Backs up to previous screen.
0 Press to answer NO
1 Press to answer YES
00 Exits menu mode, back into field programming mode, when entered at the first question for each category.
Menu selections are as follows:
PROMPTEXPLANATION
ZONE PROG? |
|
1 = YES 0 = NO | 0 |
For programming the following:
•Zone Number
•Zone Response Type
•Partition Number for Zone
•Dialer report code for zone
•Input Device Type for zone (whether RF, polling loop, etc.)
•Enrolling serial numbers of 5800 Series transmitters & serial polling loop devices into the system.
| EXPERT MODE? |
| |
| 1 = YES | 0 = NO | 0 |
| |||
|
|
| |
|
|
| |
| ALPHA PROG? |
| |
| 1 = YES | 0 = NO | 0 |
| |||
Same as Zone Programming except:
•Done with a minimum number of keystrokes.
•Can program wireless keys using
For entering alpha descriptors for the following:
•Zone Descriptors
•Installer's Message
•Custom Words
•Partition Descriptors
•Relay Descriptors
DEVICE PROG? |
|
1 = YES 0 = NO | 0 |
For defining the following device characteristics for addressable devices, including keypads, RF receivers (5881), output relay modules (4204), and 4285/4286 VIP Module:
•Device Address
•Device Type
•Keypad Options (incl. partition assignment)
•RF House ID
| RELAY PROG? |
| |
| 1 = YES | 0 = NO | 0 |
| |||
|
|
| |
|
|
| |
| RLY VOICE DESCR? |
| |
| 1 = YES | 0 = NO | 0 |
| |||
|
|
| |
|
|
| |
| CUSTOM INDEX ? |
| |
| 1 = YES | 0 = NO | 0 |
| |||
|
|
|
|
For defining relay functions.
For entering voice descriptors for relays to be used with the 4285/4286 VIP Module.
For creating custom word substitutes for VIP Module annunciation.
– 10 –
