BW Mode |
| 103 | |
On | Off | Auto1 | Auto2 |
F1 | F2 | F3 | F4 |
2.Press one of the F1 to F4 buttons. BW mode will be activated.
Available buttons and functions
F1: On
Changes the camera image from color to black and white.
F2: Off
Changes the camera image from black and white to color .
F3: Auto1
Activates Auto 1 mode. (The camera selects black and white mode if the picture is dark, or color mode if the picture is bright enough.)
F4: Auto2
Activates Auto 2 mode. (The camera detects the light source type to prevent malfunction. This set- ting is applicable when using a
Notes:
•The camera detects light source based on the informa- tion the CCD image pickup element receives. If an object is continuously moving or has the same color as the background, the object may not be properly recog- nized. When activating Auto 2 mode, make sure the wavelength of light source is 800 nm or more.
•If the available parameters for selected camera are ON, OFF, and AUTO, you can activate AUTO by pressing the F3 button.
To recover the color mode
Press the F2 button. The color mode is recovered for the camera image.
●Patrol Learn
You will perform the patrol learn setup.
Note: Refer to the operating instructions of camera for details on patrol learn.
1.Display “Patrol Learn” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)
Patrol | Learn | 104 | |
Start | Stop |
|
|
F1 | F2 | F3 | F4 |
2.Press the F1 button.
The patrol learn setup will start.
3.Perform desired camera operations by moving the 3D joystick or zoom wheel controller, etc.
The following controls are available for patrol learn.
•Panning/Tilting (3D joystick)
•Iris control (IRIS OPEN/CLOSE buttons)
•Focus control (FOCUS FAR/NEAR buttons)
•Zoom control (Zoom wheel controller)
•Preset position
Note: The available total time of patrol learn differs depending on cameras. When the time is over, the patrol learn setup will automatically stop.
4. To quit the patrol learn setup, press the F2 button.
To activate preset positions during the patrol learn
To move the camera to a preset position during the patrol learn, you will perform the following operations after Step 2 of Patrol Learn.
1.Enter a preset position number.
The entered number will appear on the LCD.
Patrol | Learn | ____3 | |
Start | Stop |
|
|
F1 | F2 | F3 | F4 |
Note: To cancel the entry, press the CLEAR button.
2.Press the PRESET/PGM PRESET button.
“Pre=nn” (nn is a number.) will blink on the LCD, and the camera will move to the preset position.
Patrol Learn Pre03
Start Stop
F1 | F2 | F3 | F4 |
Note: After the camera has moved to the preset posi- tion,
56
