![](/images/new-backgrounds/1119387/11938715x1.webp)
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
■Main Unit
●Front View
| #9$0#8 $1 | $2$3 | $4 |
| r q w e | t |
|
i u !0y |
|
| |
|
|
|
ALARM | ACK | ALM RESET |
| ||
|
| |
|
| ALMALLRESET |
ADJUST MENU F1 | F2 | F3 | F4 | EXIT ENTER |
SYSTEM CONTROLLER |
| @9 |
| #0 |
HISTORY | #1 |
|
!1
!3
!4
!7
!6
!5
!8
ALM SUSPEND | ALM RECALL | CAM FUNC | ||||
OSD | ||||||
|
| |||||
|
|
|
|
| ||
|
|
|
|
| SYS FUNC | |
SEQ PAUSE |
| TOUR SEQ |
| MON LOCK | ||
|
|
| ||||
|
|
|
|
| ||
SEQ STOP |
| GROUP | SEQ | LOGOUT | ||
|
|
| GO TO LAST | |||
|
| |||||
MULTI SCREEN |
| |||||
|
| |||||
|
|
|
| |||
AUX1 ON | AUX2 ON | MARK | ||||
| ||||||
|
|
|
|
SHIFT |
| ALM | CLEAR |
OPERATE ALARM | SUSPEND | ||
STOP | PLAY/PAUSE |
| REC REC STOP |
| SHUTTLE |
|
|
| HOLD |
|
|
REV |
|
| FWD |
RECORDER | PRESET |
UNIT | PGM |
| PRESET |
12
4 5
7 8
CAM
POSI
3 6 9
#2
#4
#3
#5
#6
@0
!9
@3
@2
@1
!2 o
OFF | OFF |
|
| |
DEF ON | SEARCH |
| ||
WIPER |
| |||
— | + | |||
| ||||
|
| |||
| OFF | T&D SEARCH |
| |
|
|
|
MON | 0 | CAM | #7 |
(ESC) | |||
|
| (SET) |
@4 @5 @7 @8 @6@8
Note: Although printed on the template, some button func- tions are not mentioned here. These functions are reserved for future use.
qOperation indicator (OPERATE)
This indicator is lighting while power is supplied to the system controller.
wAlarm indicator (ALARM)
This indicator blinks when an alarm is activated. Blinking changes to steady light when the alarm is auto- matically reset.
eAlarm suspend indicator (ALM SUSPEND)
This indicator lights up when an alarm is suspended.
rShift button (SHIFT)
To activate the alternate function of each button, press this button in combination with buttons associated with special functions.
tClear button (CLEAR)
Clears the parameter entered with numeric buttons.
yAlarm reset/Alarm all reset button (ALM RESET/ ALM ALL RESET)
This button cancels (resets) all the alarm inputs at a time.
Note: ALM ALL RESET is reserved for future use.
uAlarm Acknowledge button (ACK) This button is reserved for future use.
iAlarm/Alarm suspend button (ALARM/ALM
SUSPEND)
When you press while holding down the SHIFT button, this button temporarily stops alarm inputs to all the sys- tem units. When an alarm is suspended, "ALM SUS- PEND" indicator lights up.
Note: ALARM is reserved for future use.
8