TROUBLESHOOTING
Check the following before requesting repair.
If a trouble cannot be corrected even after checking and trying remedy, contact your dealer.
| Problem | Check item and Remedy | Reference |
|
|
|
|
| The power of system controller is not | The AC adapter may be disconnected | Refer to p. 27. |
| turned on. | from either the system controller or the |
|
|
| AC outlet. Check the connection. |
|
|
|
|
|
|
| The DC plug may not be firmly plugged | Refer to p. 27. |
|
| into the DC 9 V Input jack of system |
|
|
| controller. Check the connection. |
|
|
|
|
|
| The brightness of LCD is not enough. / | The display setting value of LCD may | Refer to p. 28. |
| Characters do not appear on the LCD. | be improper. Check the setting. |
|
|
|
|
|
| Login standby display does not appear | The settings of MODE switches at the | Refer to p. 18. |
| on the LCD | rear panel may be wrong. Check the |
|
|
| settings and turn on the power again. |
|
|
|
|
|
|
| The setting of CONTROLLER NO. | Refer to p. 18. |
|
| switch may be wrong. Check the setting |
|
|
| and turn on the power again. |
|
|
|
|
|
|
| You may have turned on the power | Refer to p. 27. |
|
| while some buttons of system controller |
|
|
| was held down. Check no buttons are |
|
|
| being held down, and turn on the power |
|
|
| again. |
|
|
|
|
|
| Users cannot control cameras with the | The cable may be disconnected from | Refer to p. 17. |
| 3D joystick. | either the main unit or 3D joystick unit. |
|
|
| Check the connection. |
|
|
|
|
|
|
| The combination codes of main unit and | Refer to p. 17. |
|
| 3D joystick unit may not be identical. |
|
|
| Check their combination codes. |
|
|
|
|
|
|
| Users who have logged into the system | Refer to pp. 62 to 65. |
|
| may not be authorized to control cam- |
|
|
| eras with the 3D joystick. Check the |
|
|
| user level settings of these users. |
|
|
|
|
|
| Users cannot log into the system. | Cables may be disconnected from | Refer to p. 16. |
|
| either the DATA ports of system con- |
|
|
| troller or other system units. Check the |
|
|
| connections. |
|
|
|
|
|
|
| The line termination settings of MODE | Refer to p. 18. |
|
| switches may be wrong. Check the set- |
|
|
| tings and turn on the power again. |
|
|
|
|
|
|
| You may have entered a wrong user ID. | Refer to p. 29. |
|
| Reenter the user ID correctly. |
|
|
|
|
|
|
| You may have entered a wrong pass- | Refer to p. 29. |
|
| word. If the password is wrong, the |
|
|
| LCD will return to the login standby dis- |
|
74 |
| play. Reenter the password correctly. |
|
|
|
| |
|
|
|
