Panasonic WV-CU650 operating instructions Defroster Control, Auxiliary Control, Other Functions

■Defroster Control

The following procedure is available when a selected cam- era (housing) is equipped with a defroster.

1.Select a system unit, monitor, and desired camera. (Refer to p. 31 System Unit Selection, p. 32 Monitor Selection, and p. 32 Camera Selection.)

2.Press the DEF ON/OFF button. The defroster will be activated.

Note: The defroster will be automatically deactivated after the specified time.

3.To deactivate the defroster, press the DEF ON/OFF but- ton while holding down the SHIFT button.

■Auxiliary Control

You can control one or two auxiliary control devices. The following procedure is available when an auxiliary control device, such as Receiver WV-RC150, is connected to a system unit.

Note: The operation procedure differs depending on the mode setting (=latch or momentary mode) of auxiliary control device.

●Operating Procedure (Latch mode)

1.Select a system unit, monitor, and camera an auxiliary control device is connected to. (Refer to p. 31 System Unit Selection, p. 32 Monitor Selection, and p. 32 Camera Selection.)

2.Press the AUX 1 ON/OFF or AUX 2 ON/OFF button.

The auxiliary control device, associated by the installa- tion wiring, will be activated.

3.To quit the auxiliary control, press the AUX 1 ON/OFF or AUX 2 ON/OFF button while holding down the SHIFT button.

●Operating Procedure (Momentary mode)

1.Select a system unit, monitor, and camera an auxiliary control device is connected to. (Refer to p. 31 System Unit Selection, p. 32 Monitor Selection, and p. 32 Camera Selection.)

2.Keep pressing the AUX 1 ON/OFF or AUX 2 ON/OFF button.

The auxiliary control device, associated by the installa- tion wiring, will be activated while this button is being pressed.

■Other Functions

You can control the following functions by pressing the function buttons (F1 to F8). Refer to p. 55 MENU FUNC-

TION DETAILS.

•Camera setup (p. 55)

•Auto mode (p. 55)

•BW mode (p. 55)

•Patrol Learn (p. 56)

•Auto pan setup and activation (p. 57)

•Camera cleaning (p. 60)

•Camera function (p. 69)

•Auto pan (p. 70)

•Camera sequence (p. 70)

•Camera sort (p. 70)

•Patrol play (p. 70)

•Home position (p. 71)

•Auto focus (p. 71)

•Iris reset (p. 71)

•Camera +1 (p. 71)

•Camera –1 (p. 72)

43