■If You Have Forgotten the Login Password
Refer to the system administrator.
■Operation Start (Auto Login)
When auto login is set to ON, operators can log into the system without entering their passwords. The LCD display after
1.When the power is turned on, “Auto Login” appears on the LCD for a second.
PS • Data Mode
Auto Login
2.The user ID of auto login user appear on the LCD. Then, the operator will log into the system automatically.
PS·Data | Mode |
User ID | = 650 |
Mon01 | Cam128 |
| Unit16 |
F1 | F2 | F3 | F4 |
Mon01 Cam128 HD316
F1 F2 F3 F4
Notes:
•This illustration is an example in which the operator number is “650”.
•The smallest monitor, camera, and unit numbers are displayed on the LCD.
•Three seconds after the unit number was deter- mined, model number appears in place of unit num- ber.
•Due to security, the password is not displayed on the LCD.
■Operation End (Logout)
You need to log out from the system:
•When finishing operation and turning off the power
•When changing an operator
1.During the login status, press the LOGOUT button while holding down the SHIFT button.
2.You will log out of the system, and "Logout" will appear on the LCD. Then, the LCD returns to the login standby display.
Logout
PS·Data Mode
No User
Alarm sign after logout
If power is being supplied even after logout, the current system status will be continuously informed by “Alarm sign” and the ALM SUSPEND indicator. If an alarm is newly acti- vated after logout, “Alarm” sign will blink. (The blinking will change to steady light when the alarm is automatically reset.)
30
