BEFORE OPERATION
■Power-on
Before operation, confirm the system composition. Depending on system composition, some functions may be unavailable.
1.Plug the supplied AC adapter into an AC 120 V out- let.
2.Insert the DC 9 V plug into the DC 9V Input Jack at the rear panel.
AC outlet |
| Clamp | |
(Fastens the supplied | |||
| |||
| AC adapter | AC adapter’s | |
| power cord.) | ||
DC 9V plug
DC9V IN
DC 9V Input Jack
The power will be turned on. Then, the OPERATE indi- cator will light up. and the software version → controller number → login standby display will appear on the LCD.
Power is turned on.
Ver.1.00 |
|
| (Lighting for 2.0 seconds) | |
Software version appears. |
| |||
|
|
| ||
|
|
|
| |
PS·Data | Mode | (Lighting for 1.0 second) | ||
CU Unit | No.1 | |||
| ||||
Controller number appears. |
| |||
|
|
| ||
|
|
|
| |
PS·Data | Mode | (Lighting until login) | ||
No User |
|
| ||
|
|
| ||
Login standby display appears.
■Power-off
After operation, power off the system controller as follows.
1.Log out from the system. (Refer to p. 30.)
2.Unplug the AC adapter from the AC outlet.
The power will be turned off. Then, the OPERATE indi- cator will go out.
When leaving away from the system controller for a long time
Log out of the system and unplug the AC adapter from the AC outlet. If the AC adapter is kept plugged into the AC outlet, the adapter will consume electricity even after the DC 9 V plug is removed from the DC 9V Input Jack.
27
