The LCD display of destination system controller(s) becomes as follows.
Data Base Rx Mode
Completed Sum=1733
Note: If the check sum is not identical, check the con-
5.To search a desired operator, rotate the JogDial. The user ID and password of Operator 1 to 16 will appear interchangeably.
6.Turn off the power.
Operator 1 information
nection of all the controllers, and retry the data base copy.
12.Turn off the power of source and destination system controllers.
■PS·Data Operator Password Check
In case operators have forgotten their passwords, the administrator can check the passwords in the following pro- cedure.
●Operation
1.Turn off the power.
2.Turn on the power of system controller while holding down the button 4 and MON (ESC) button. “Admin Password” will appear on the LCD to enter the password.
PSD Password Check
Admin Password _____
3.Enter the administrator password.
The password entered will be displayed as “∗” marks.
PSD Password Check
Admin Password ∗ ∗ ∗ ∗ ∗
Notes:
•The factory default is “650”.
•If the password entered is wrong, the LCD display will return to Step 2.
4.Press the CAM (SET) button.
If the password entered is correct, “User ID” and “Password” of Operator 1 will appear on the LCD while you are holding down the buttons.
No.01 User ID | 650 |
Password | 650 |
Rotate the JogDial.
No.01 User ID | 650 |
Password 650
Rotate the JogDial.
Operator 2 information
No.02 User ID | 1 |
Password 12345
Rotate the JogDial.
•
•
Operator 16 information
No.16 User ID | 100 |
Password | 100 |
26
