●Filtering ON/OFF (WJ-HD300 Series Only)
During the filtering playback, the searching filter will be temporarily canceled or recovered.
1.Display “HD300 Listed” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)
HD300 | Listed | 203 | |
On | Off |
|
|
F1 | F2 | F3 | F4 |
Note: To cancel the numeric entry, press the CLEAR button.
3.Press the F1 button.
•Playback picture will be displayed on the multi- screen monitor.
•The specified camera channel will blink on the LCD for a few seconds, and the LCD display will return to Step 1.
HD500 | 204 |
Video CH=__5
2.Press the F2 button.
The searching filter will be canceled, and “s” mark will light up beside “Off”.
HD300 | Listed | 203 | |
On | Off |
|
|
F1 | F2 | F3 | F4 |
Note: To recover the searching filter, press the F1 button. The searching filter will be recovered, and “s” mark will light up beside “On”.
●Displaying Camera and Playback Image (WJ-HD500 Series Only)
While camera images are being displayed in the multi- screen display, playback picture can be displayed on one of the multiscreen segments. (When the spot mode is acti- vated for the camera image on the monitor, playback pic- ture cannot be displayed.)
Note: Refer to the operating instructions of recorder for details on this function.
1.Display “HD500
HD500 | 204 |
"Input Video CH"
Note: To quit the playback on the multiscreen monitor, press the STOP button.
■System Functions
●System Setup
You can display the setup menu of selected system unit on the active monitor.
Note: The details on the setup menu differ depending on system units. Refer to the operating instructions of sys- tem unit.
1.Display “System Setup” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)
System | Setup | 301 | |
On | Off |
|
|
F1 | F2 | F3 | F4 |
2.Press the F1 button.
The setup menu of selected system unit will appear on the active monitor, and “s” mark will light up beside “On”.
System | Setup | 301 | |
On | Off |
|
|
F1 | F2 | F3 | F4 |
2.Enter the channel number of camera whose playback picture you wish to display.
The entered number will appear on the LCD.
HD500 V-Multi ____5
"Enter F1 Button"
3.Perform the camera setting while watching the setup menu on the monitor.
58
