●Camera –1
You can change the camera image on the monitor to the lower channel.
1.Display “Camera
Camera |
| 511 | |
“Enter | F1 | Button” | |
F1 | F2 | F3 | F4 |
2.Press the F1 button.
The image of lower camera channel will be displayed on the active monitor.
Note: When the Camera
Camera | A |
●A - B Repeat Playback (WJ-HD300 Series Only)
The description is the same as that of button function. Refer to p. 57 A – B Repeat Playback Setting.
Note: Refer to the operating instruction of recorder for details of this function.
1.Display “HD300 A – B Repeat” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)
HD300 A—B Repeat 512
“Enter F1 Button”
F1 | F2 | F3 | F4 |
2.Press the F1 button at the point you wish to start play- back.
The playback start point (A) will be set, and “Start” will appear on the LCD for a few seconds.
HD300 A—B Repeat 512
Start
F1 | F2 | F3 | F4 |
3.Press the F1 button again at the point you wish to end playback. The playback end point (B) will be set, and “End” will appear on the LCD for a few seconds. Then, the repeat playback will be performed between (A) and
(B).
HD300 A—B Repeat 512
End
F1 | F2 | F3 | F4 |
Notes:
•To quit the repeat playback, press the F1 button again. “Cancel” will appear on the LCD for a few seconds.
HD300 A—B Repeat 512
Cancel
•When the A – B repeat playback function has been activated with the function button, the LCD display will become as follows.
HD300 | A | |
Start |
|
|
HD300 | A |
End |
|
HD300 | A |
Cancel |
|
●Recorded-image Copy (WJ-HD500 Series Only)
You can copy recorded images from the
Note: Refer to the operating instruction of recorder for details of this function.
1.Display “HD500 Copy” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)
HD500 | Copy |
| 513 |
“Enter | F1 | Button” | |
F1 | F2 | F3 | F4 |
2.Press the F1 button.
The record copy function will be activated.
Note: When the record copy function has been acti- vated with the A button, the LCD display will become as follows.
72
