●System Functions (SYS)
System Setup
LCD MENU | SYS 301 |
System Setup
You will open the setup menu of system unit and change the settings.
SX150 OSD
LCD MENU | SYS 302 |
SX150 OSD |
|
This function is reserved for future use.
VLD History
LCD | MENU | SYS 303 |
VLD | History |
|
This function is reserved for future use.
Mux VCR/CAM (Available if Video Multiplexer
LCD | MENU | SYS 304 |
Mux | VCR/CAM |
|
You can activate either VCR playback or camera picture display on an active monitor.
Mux Still (Available if Video Multiplexer WJ- FS416 or Multiplexer Board
LCD | MENU | SYS 305 |
Mux | Still |
|
You can activate either still or moving mode for display on the multiscreen monitor.
●Controller
Camera Cleaning
LCD MENU | CNT 401 |
Camera Cleaning
You will select the first and last camera channel to perform camera cleaning.
Time & Date Type
LCD MENU | CNT 402 |
Time&Date Type
You will set the time and date display pattern of
Auto Login
LCD | MENU | CNT 403 |
Auto | Login |
|
You will set operators who can log into the system automati- cally.
Operator Setup
LCD MENU | CNT 404 |
Operator Setup
•You will register a new operator.
•You will change parameters of registered operators.
Function Level
LCD MENU | CNT 405 |
Function Level
You will change the function levels of operators.
Camera Level
LCD MENU | CNT 406 |
Camera Level
You will change the camera control levels of operators.
Cam Posi Map
LCD MENU | CNT 407 |
Cam Posi Map
You will register camera positions (the association of cam- era numbers and preset position numbers).
49
