11
● Rear View
DC9V IN
MODE
DATA
SERIAL
CONTROLLER
NO.
JOYSTICK

$8 $9$7$6$5$4

$4 Joystick connector (JOYSTICK)
This connector is used for connection with the joystick.
$5 Serial port (SERIAL)
This port is used for connection with a PC for system
configuration.
$6 Data ports (DATA)
These ports are used for connection with the system
controller and other system units. These ports are also
used when adding other system controller connections.
$7 Mode Selection switches (MODE)
The operation mode of system controller is selected
with these switches.
$8 Controller Number switch (CONTROLLER NO.)
When two or more system controllers are connected in
the system, this switch determines the unit number of
each controller. (Refer to p. 18 for the setting.) If con-
necting only one system controller in the system, set
this switch to “1”.
$9 DC 9V Input jack (DC 9V IN)
An AC adapter, supplied with the system controller, is
plugged into this jack.