LCD MENU | CAM 101 |
Camera Setup
2.Select a desired function.
Select a desired category by rotating the shuttle ring.
LCD MENU | SYS 301 |
System Setup
3. Select a function name by rotating the JogDial.
LCD | MENU | SYS 305 |
Mux | Still |
|
•You can skip Step 2 if you know what function to recall. In this case, enter a function number, and press the ENTER button.
4.Press the function button you wish to assign the func- tion for two seconds. The function will be assigned to the button, and the message will appear for a few sec- onds.
Notes:
•The illustration is an example in which Camera Function Number 1 is pressed.
•Refer to the operating instruction of camera for details on camera function.
•Refer to the operating instruction of system unit for details on system function.
3.Press the A, B or top button for two seconds.
•The menu function will be assigned to the button you pressed.
•“Assign” message will appear for a few seconds, as shown in the illustration.
Camera Function 501
Assign A Code= 1
Note: The illustration is an example in which “Camera Function Code = 1” has been assigned to the A button.
4.To exit the menu, press the EXIT or MON (ESC) button. The LCD will return to the normal display.
Mux Still | 305 |
Assign F2 |
|
Notes:
•To assign menu functions to F5 to F8 buttons, press one of the F1 to F4 buttons for two seconds while holding down the SHIFT button.
•The setting procedure differs depending on each function. Refer to pp. 55 to 73.
5.To exit the menu, press the EXIT or MON (ESC) button. The LCD display will return to the default status.
■To Assign Menu Functions to Joystick Function Buttons
Joystick button functions are assignable to the A, B, or top button on the 3D joystick unit. (Refer to p. 68 to 72 for each function.)
1.Perform Step 1 to 3 in “To Assign Menu Functions to Function Buttons”. (Refer to p. 52.)
Note: Skip the next step when assigning neither “Camera Function” nor “System Function”.
2.Enter a desired camera or system function number with the numeric buttons. The entered number will appear on the LCD for a few seconds.
J/S MENU | ____1 |
Camera Function
■To Recall Button Functions and Joystick Button Functions
You can recall the assigned button functions and joystick button functions as follows.
1.Press one of the function buttons (F1 to F4/F5 to F8) or one of the joystick function buttons (A, B, and top but- tons). The sub menu of recalled function will appear on the LCD.
Mon02 Cam128 HD316
F1 F2 F3 F4
Camera | Setup | F1 |
On | Off Rst | A.Rst |
Note: To recall a function assigned to the F5 to F8 but- ton, press the function button while holding down the SHIFT button.
2.Perform the operations to activate the function.
The operating procedure differs depending on each function. Refer to pp. 55 to 73.
Note: To cancel the function, press the EXIT or MON (ESC) button. The LCD display will return to the nor- mal status.
53
