HotBrick Network Solutions

7.Select "Set up my connection manually" and click Next.

8.Check "Connect using a broadband connection that is always on" and click Next.

9.Click Finish to close the New Connection Wizard. Setup is now completed.

Accessing AOL

To access AOL (America On Line) through the Load Balancer LB-2, the AOL for Windows software must be configured to use TCP/IP network access, rather than a dial-up connection. The configuration process is as follows:

Start the AOL for Windows communication software. Ensure that it is Version 2.5, 3.0 or later. This procedure will not work with earlier versions.

Click the Setup button.

Select Create Location, and change the location name from "New Locality" to "Load Balancer LB- 2".

Click Edit Location. Select TCP/IP for the Network field. (Leave the Phone Number blank.)

Click Save, then OK. Configuration is now complete.

Before clicking "Sign On", always ensure that you are using the "Load Balancer LB-2" location.

Macintosh Clients

From your Macintosh, you can access the Internet via the Load Balancer LB-2. The procedure is as follows.

1.Open the TCP/IP Control Panel.

2.Select Ethernet from the Connect via pop-up menu.

3.Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left blank.

4.Close the TCP/IP panel, saving your settings.

Note:

If using manually assigned IP addresses instead of DHCP, the required changes are:

Set the Router Address field to the Load Balancer’s LB-2 IP Address.

Ensure your DNS settings are correct.

Linux Clients

To access the Internet via the Load Balancer LB-2, it is only necessary to set the Load Balancer LB-2 as the "Gateway", and ensure your Name Server settings are correct.

Ensure you are logged in as "root" before attempting any changes.

17

Page 21
Image 21
HotBrick LB-2 manual Macintosh Clients, Linux Clients, Accessing AOL