HotBrick LB-2 manual No Response ?

HotBrick Network Solutions

•The "User Name" is always admin

•You can and should set a password, using the following Admin Password screen.

No Response ?

•Is your PC using a Fixed IP address ?

If so, you must configure your PC to use an IP address within the range 192.168.1.2 to 192.168.1.254, with a Network Mask of 255.255.255.0. See Appendix B – Windows TCP/IP Setup for details.

•Check that the Load Balancer LB-2 is properly installed, LAN connection is OK, and it is powered ON.

8.After the login, you will then see the Admin Password screen, as shown below. Assign a password by entering it in the "Password" and "Verify Fields.

Figure 5: Home Screen (Admin Password) LB-2

9