HotBrick Network Solutions

Buttons

Refresh – Update the data on screen.

Restart – Restart (reboot) the Load Balancer.

Restore Factory Defaults – This will delete all existing settings, and restore the factory default settings. See below for details.

Restore Factory Defaults

When the "Restore Factory Defaults" button on the Status screen above is clicked, the following screen is displayed.

Figure 37: Restore Factory Defaults

If the "Restore Default Value" button on this screen is clicked:

ALL of your settings will be erased.

The default IP address, password and ALL other settings will be restored to the factory default values.

The DCHP server function will be enabled.

These changes may mean that the current connection is invalid, and you will have to re-connect to the Load Balancer using its default IP address (192.168.1.1).

63

Page 68
Image 68
HotBrick LB-2 manual Restore Factory Defaults