HotBrick Network Solutions
Data – System Status
WAN
Information
Connection Status – Current status – either "Connected" or "Not connected".
Connection Type – The type of connection used – DHCP, Fixed IP, PPPoE,
or PPTP.
"Force Renew" button– Only available if using a dynamic IP address
(DHCP). Clicking this button will perform a DHCP "Renew" transaction with
the ISP's DHCP server. This will extend the period for which the current WAN
IP address is allocated to you.
IP Address – The IP address of the Load Balancer, as seen from the Internet.
This IP Address is allocated by the ISP (Internet Service Provider)
Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above.
Domain Name IP Address – The address of the current DNS (Domain Name
Server.
MAC Address – The MAC (physical) address of the Load Balancer, as seen
from the Internet.
LAN
Information
IP Address – The LAN IP Address of the Load Balancer.
Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above.
MAC Address – The MAC (physical) address of the Load Balancer, as seen
from the local LAN.
DHCP Server – The status of the DHCP Server function - either "Enabled" or
"Disabled".
Device
Information
Firmware Version – Version of the Firmware currently installed.
NAT – Status of the NAT feature – either “Enable” or “Disable”.
Load Balance – Status of the Load Balance feature – either “Enable” or
“Disable”.
Virtual Server – Status of the Virtual Server feature – either "Enabled" or
"Disabled".
Special Applications – Status of the Special Applications feature – either
"Enabled" or "Disabled".
DMZ – Status of the DMZ feature – either "Enabled" or "Disabled".
Block URL – Status of the Block URL feature – either “Enable” or “Disable”.
Hardware ID – The manufacturers ID for this particular device.
Device
Statistics
System UpTime – The time since the system of a device was last
reinitialized.
CPU Usage – The current usage percentage of CPU.
Memory Usage – The current usage percentage of Memory (Heap & Queue).
62