HotBrick Network Solutions
Advanced PPPoE
The screen is required in order to use multiple PPPoE sessions on the same WAN port. It can also be used to manually connect or disconnect a PPPoE session.
| Figure 11: Advanced PPPoE |
Settings – Advanced PPPoE | |
|
|
WAN Port | Select the desired Port and Session, then click the "Select" button. The data |
PPPoE Session | for the selected Port/Session will then be displayed in the WAN IP Account |
| section. |
WAN IP Account | • User Name – Enter the PPPoE user name assigned by your ISP. |
| • Password – Enter the PPPoE password assigned by your ISP. |
| • Verify Password – |
| • IP Address – If you have a fixed IP address, enter if here. Otherwise, this |
| field should be left at 0.0.0.0. |
| • Host Name – This field is used by a Host to uniquely associate an access |
| concentrator to a particular Host request. |
Action | Use the "Connect" and "Disconnect" buttons to establish or terminate a |
| connection on this session, if required. |
Connection | This displays the current connection status for each session. |
Status |
|
23
