HotBrick manual Windows Tftp utility LB-2

HotBrick Network Solutions

Figure 3: Windows TFTP utility LB-2

•Enter the name of the firmware upgrade file on your PC, or click the "Browse" button to locate the file.

•Enter the LAN IP address of the Load Balancer LB-2 in the "Server IP" field.

•Click "Download" to send the file to the Load Balancer LB-2.

3.When downloading is finished. It should then work normally, using the default settings.

Note:

The supplied Windows TFTP utility also allows you to perform three (3) other operations:

•Save the current configuration settings to your PC (use the "Upload" button).

•Restore a previously-saved configuration file to the Load Balancer LB-2 (use the "Download" button).

•Set the Load Balancer LB-2 to its default values (use the "Set to Default" button).

7