Set up the HP JetDirect 175x
Your HP
Note Using the HP JetDirect 175x, you can print and send a scan using Webscan from your computer. You can also make copies and print from the control panel of your HP
To network connect your HP
1.Do one of the following:
–If you are setting up the HP
–If your HP
2.Follow the HP JetDirect 175x setup instructions to connect the print server to a LAN.
3.Connect the HP JetDirect to the USB port on the rear of your HP
4.Insert the HP JetDirect installation CD.
You will use this CD to locate the HP JetDirect on the network.
5.Select Install to run the HP JetDirect installer.
6.When prompted, insert the HP
Note If you are performing an initial installation of your HP
7.Follow the steps appropriate for your operating system:
If you are using Windows XP or 2000:
➔Browse to the root directory of the CD and select the printer driver file, hpoprn08.inf.
If you are using Windows 98 or ME:
a.Browse the CD for the "Drivers" folder and find the correct language subfolder. For example, for English speaking customers, navigate to the \enu\drivers \win9x_me directory, where enu is the English language directory and win9x_me is for Windows ME. The printer driver file is hpoupdrx.inf.
b.If prompted, repeat for each of the files required.
8.Complete the installation following the screens on your computer.
Note If at some later time you want to connect to your computer using a USB cable, disconnect the HP JetDirect from your HP
information Connection
User Guide | 19 |