Use the copy features
Chapter 7
5.Press Start Copy Black or Start Copy Color.
Make multiple copies of the same original
You can set the number of copies from the control panel or from the HP Image Zone software.
1.Make sure you have paper loaded in the paper tray.
2.Load your original face down on the right front corner of the glass.
3.Press No. of Copies.
4.Press or to enter the number of copies, up to the maximum, and then press OK.
(The maximum number of copies varies by model.)
Tip If you hold down either of the arrow buttons, the number of copies changes by increments of 5 to make it easier to set a large number of copies.
5.Press Start Copy Black or Start Copy Color.
In this example, the HP
Copy a two-page black-and-white document
You can use the HP
1.Make sure you have paper loaded in the paper tray.
2.Load the first page of your original face down on the right front corner of the glass.
3.Press Start Copy Black.
4.Remove the first page from the glass and load the second page.
5.Press Start Copy Black.
50 | HP PSC 1600 |