Chapter 12

it will not completely fit in the control panel display and will need to scroll. This is so that you can read the entire message. You can choose the rate at which it will scroll: Normal, Fast, or Slow. The default is Normal.

1.Press Setup until Preferences appears, and then press OK.

2.Press until Set Scroll Speed appears, and then press OK.

3.Press to select a scroll speed, then press OK.

Set the prompt delay time

The Prompt Delay Time option allows you to control the amount of time that passes before a message prompts you to take further action. For example, if you press Copy Menu and the prompt delay time passes without you pressing another button, the message "Press Copy Menu for more options." appears in the control panel display. You can choose Fast, Normal, Slow, or Off. If you select Off, hints will not appear on the control panel display but other messages, such as low ink warnings and error messages, will still appear.

1.Press Setup until Preferences appears, and then press OK.

2.Press until Set Prompt Delay Time appears, and then press OK.

3.Press to select a delay time, then press OK.

Restore the factory defaults

You can restore the current settings to what they were when you purchased your HP All-in-One.

Note Restoring the factory defaults will not affect any changes you made to scan settings and the language and country/region settings.

You can perform this process from the control panel only.

1.Press Setup until Tools appears, and then press OK.

2.Press until Restore Factory Defaults appears, and then press OK. The factory default settings are restored.

Maintain your HP All-in-One

88

HP PSC 1600 All-in-One series