The control panel display shows the wrong language

Solution Usually, you set the language and country/region when you first set up the HP All-in-One. However, you can change these settings at any time by using the following procedure:

1.Press Setup until Preferences appears, and then press OK.

2.Press until Set Language & Country/Region appears, and then press OK. You are prompted with a list of languages. You can scroll through the list of languages by pressing or .

3.Press OK on the appropriate language.

4.When prompted, press OK to select Yes or Cancel to select No.

You are prompted with a list of countries/regions for the selected language.

5.Press to select the appropriate country/region, and then press OK.

6.When prompted, press to select Yes or No, and then press OK.

You can confirm the language and country/region by printing a Self-Test Report, as follows:

1.Press Setup until Print Report appears, and then press OK.

2.Press until Self-Test Report appears, and then press OK.

The wrong measurements are showing in menus on the control panel display

Solution You might have selected the incorrect country/region when setting up your HP All-in-One. The country/region you select determines the paper sizes shown on the control panel display.

To change the country/region, you must first set the default language again. Usually, you set the language and country/region when you first set up the HP All- in-One. However, you can change these settings at any time by using the following procedure:

1.Press Setup until Preferences appears, and then press OK.

2.Press until Set Language & Country/Region appears, and then press OK. You are prompted with a list of languages. You can scroll through the list of languages by pressing or .

3.Press OK on the appropriate language.

4.When prompted, press OK to select Yes or Cancel to select No.

You are prompted with all the countries/regions for the selected language.

5.Press to select the appropriate country/region, and then press OK.

6.When prompted, press to select Yes or No, and then press OK.

Print a Self-Test Report to confirm the language and country/region:

1.Press Setup until Print Report appears, and then press OK.

2.Press until Self-Test Report appears, and then press OK.

I received a message on the control panel display to align the print cartridges

Cause The HP All-in-One prompts you to align cartridges every time you install a new print cartridge.

information Troubleshooting

User Guide

93