Connection information
Chapter 3
HP printer driver from your computer, and follow the instructions provided in the Setup Guide that came with your HP
To network connect your HP
1.Follow the HP JetDirect 175x setup instructions to connect the print server to a LAN.
2.Connect the HP JetDirect to the USB port on the rear of your HP
3.Do one of the following:
–If you are setting up your HP
The network support software for your computer is installed at this time. When the installation is finished, the HP
–From the Disk Drive, open the HP
The HP
4.Follow the onscreen prompts and provide the information requested.
Note Make sure you click TCP/IP Network on the connection screen.
Use Webscan
Webscan lets you perform a basic scan through the HP JetDirect 175x using just a Web browser. It also lets you perform the scan from your HP
HP JetDirect in a Web browser and access the HP JetDirect embedded Web server and Webscan.
The user interface for Webscan is unique to using the HP JetDirect and does not support
To use Webscan
1.Briefly press and release the test button on the rear of the HP JetDirect 175x. The HP JetDirect network configuration page prints on the HP
2.Enter the IP address of the HP JetDirect (obtained from the network configuration page) in a Web browser on your computer.
The HP JetDirect Web server opens in the browser window.
3.Select Scan.
4.Follow the onscreen instructions.
20 | HP PSC 1600 |