Use the copy features

Chapter 7

Paper type

Suggested paper size settings

 

 

Copier, multi-purpose, or plain papers

Letter or A4

 

 

Inkjet papers

Letter or A4

 

 

Iron-on transfers

Letter or A4

 

 

Letterhead

Letter or A4

 

 

Photo papers

10 x 15 cm or 10 x 15 cm Borderless

 

13 x 18 cm or 13 x 18 cm Borderless

 

4 x 6 inches or 4 x 6 Borderless

 

5 x 7 inches or 5 x 7 Borderless

 

Letter or Letter Borderless

 

A4 or A4 Borderless

 

L-size or L-size Borderless (Japan only)

 

 

Hagaki cards

Hagaki or Hagaki Borderless (Japan

 

only)

 

 

Transparency films

Letter or A4

 

 

Set the copy paper type

You can set the paper type on your HP All-in-One. The default paper type setting for copying is Automatic, which causes the HP All-in-One to detect the type of paper in the paper tray.

If you copy onto special papers, or if you experience poor print quality by using the Automatic setting, you can set the paper type manually from the Copy Menu.

Note The HP All-in-One cannot automatically detect transparency film. For best results, set the paper type to Transparency before copying onto transparency film.

1.Make sure you have paper loaded in the paper tray.

2.Load your original face down on the right front corner of the glass.

3.Press Copy Menu until Copy Paper Type appears.

4.Press until the appropriate paper type appears, and then press OK.

5.Press Start Copy Black or Start Copy Color.

Refer to the following table to determine which paper type setting to choose based on the paper loaded in the paper tray.

Paper type

Control panel setting

 

 

Copier paper or letterhead

Plain Paper

 

 

HP Bright White Paper

Plain Paper

 

 

HP Premium Plus Photo Paper, Glossy

Premium Photo

 

 

48

HP PSC 1600 All-in-One series