HP ProCurve 2520 show, Note, Figure 10-4.Example of a show interfaces config Command Listing

Port Status and Configuration

Viewing Port Status and Configuring Port Parameters

ProCurve(config)#		show interfaces config
Port Settings
Port	Type	Enabled	Mode	Flow Ctrl	MDI
-----	---------	+ -------	------------	---------	----
1	10/100TX	Yes	Auto-10-100	Disable	Auto
2	10/100TX	Yes	Auto	Disable	Auto
3	10/100TX	Yes	Auto	Disable	Auto
4	10/100TX	Yes	Auto	Disable	Auto
5	10/100TX	Yes	Auto	Disable	Auto
6	10/100TX	Yes	Auto	Disable	Auto

Figure 10-4. Example of a show interfaces config Command Listing

The display option can be used to initiate the dynamic update of the show interfaces command with the output being the same as the show interfaces command. When using the display option in the CLI, the information stays on the screen and is updated every 3 seconds, as occurs with the display using the menu feature. The update is terminated with Cntl-C.

You can use the arrow keys to scroll through the screen when the output does not fit in one screen.

Syntax: show int display

Initiates the dynamic update of a command. The output is the same as the equivalent “show” command.The information is updated every 3 seconds.

Note: Select “Back” to exit the display.

For example:

ProCurve# show int display

10-10