Configuring for Network Management Applications

LLDP (Link-Layer Discovery Protocol)

Viewing the Current ConfigurationDisplaying the Global LLDP, Port Admin, and SNMP Notification

Status. This command displays the switch’s general LLDP configuration status, including some per-port information affecting advertisement traffic and trap notifications.

Syntax show lldp config

Displays the LLDP global configuration, LLDP port status, and SNMP notification status. For information on port admin status, refer to “Configuring Per-Port Transmit and Receive Modes” on page 13-49.

For example, show lldp config produces the following display when the switch is in the default LLDP configuration:

ProCurve(config)# show lldp config

LLDP Global Configuation

 

 

LLDP Enabled [Yes] : Yes

[30]

: 30

LLDP Transmit Interval

LLDP Hold time Multiplier

[4]

: 4

LLDP Delay Interval

[2]

: 2

LLDP Reinit Interval

[2]

: 2

LLDP Notification Interval

[5]

: 5

LLDP Fast Start Count

[5]

: 5

LLDP Port Configuration

Note: This value corresponds to the lldp refresh-interval command (page 13-45).

Port

AdminStatus

NotificationEnabled

Med Topology Trap Enabled

-----

+ -----------

-------------------

-------------------------

1

Tx_Rx

False

False

2

Tx_Rx

False

False

3

Tx_Rx

False

False

4

Tx_Rx

False

False

5

Tx_Rx

False

False

Figure 13-14. Example of Viewing the General LLDP Configuration

13-43